DBH 5074 radial shaft seal — 15 x 24 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5074 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5074 and any equivalents.
The DBH 5074 is a radial shaft seal, commonly called an oil seal, designed to keep lubricant in and contaminants out where a shaft rotates within a housing. With a 15 mm shaft diameter, 24 mm housing diameter and 7.00 mm height, and an Lx design, it fits many gearboxes, pumps, motors and power transmission units. MR Industrial Accessories supplies this brand and helps you identify the right seal for your equipment.
This seal follows the Lx configuration: a single lip with a spring. The elastomeric lip rides against the shaft while the metal case presses into the housing, creating a barrier that retains oil or grease and blocks dust, chips and water. The three key dimensions are shaft 15 mm, housing 24 mm and height 7.00 mm.
You will find this size in gearboxes, centrifugal pumps, electric motors, compressors, speed reducers and other power transmission assemblies. It also appears in machine tools, washing equipment and conveyors. In every case, the seal performs two jobs: containing lubricant and excluding outside contaminants.
Before installing, inspect the shaft for burrs or wear and make sure the housing is clean and free of dents. Apply a light film of the same oil used in the machine to the lip, then press the seal in squarely. Avoid tilting or hammering it. If the shaft shows a visible groove, a repair sleeve may be needed. Seal selection also depends on speed, temperature and lubricant type.
If you need a replacement, send the code 5074 or the three dimensions. A photo of the part or a drawing also works. MR Industrial Accessories compares available options and confirms the one that matches your application.
To request a quote for the DBH 5074, contact us via WhatsApp or email with the code and quantity. MR Industrial Accessories assists with seal and oil seal selection for your equipment.
Dimensions
- Shaft (d)
- 15mm
- Housing bore (D)
- 24mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 5074 seal?
- It is a radial shaft seal with a 15 mm shaft diameter, 24 mm housing diameter and 7.00 mm height. The design is Lx, single lip with spring, as listed in the manufacturer's data sheet.
- How do I know if this seal replaces the one I have installed?
- Check the three dimensions: shaft diameter, housing diameter and height. If they match, it is likely compatible. Also compare lip type and material. If unsure, send a photo or the code via WhatsApp and we will review it.
- What care should I take when installing a radial shaft seal?
- Clean the housing and verify the shaft has no burrs or wear. Lubricate the lip with clean oil and press evenly without tilting. Impacts or a crooked installation can damage the lip and cause leaks.