DBH 1460 radial shaft seal — 38 x 65 x 12 169
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1460 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1460 and any equivalents.
The DBH 1460 is a radial shaft seal with a single spring-loaded lip. It keeps oil or grease inside rotating assemblies and blocks dust and water from getting in. The Lx design uses a flexible sealing lip and an outer metal case. With a 38 mm bore, 65 mm outer diameter and 12 mm width, it fits common gearbox, pump, motor and power transmission shafts. MR supplies this brand and helps you match the seal to your application.
You will find the code 1460 on the seal, along with its three key dimensions: 38.00 mm inner diameter, 65.00 mm outer diameter and 12 mm width. The Lx configuration pairs a spring-loaded lip with a metal outer case. The case presses into the housing to form a static seal, while the lip rides against the rotating shaft to hold lubricant in place.
Typical installations include gearboxes, reducers, centrifugal pumps, electric motors, compressors, mixers and conveyor rollers. Any application where a shaft turns inside a lubricated housing and dust or water is present is a candidate. Because the lip runs against the shaft, it wears over time: it can harden, lose tension and begin to leak.
Before mounting, confirm that the shaft and housing diameters match the seal. The shaft surface should be clean and free of burrs or deep grooves. Apply lubricant to the lip, then press the seal in squarely using a tube or press that contacts only the outer face, never the lip. If the shaft shows a wear track, a seal with the lip positioned differently can help avoid the same groove.
For an equivalent, send the code stamped on the old seal, the shaft, housing and width dimensions, and a photo. With that information we can locate a DBH replacement or a suitable alternative from another brand. We can also advise whether an extra lip or a reinforced case makes sense for your contamination level and shaft speed.
To request a quote for the DBH 1460 oil seal, send the part number by WhatsApp or email. We confirm compatible options and the quantity you need for your maintenance work.
Dimensions
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 1460 oil seal?
- The DBH 1460 has a 38.00 mm inner diameter, a 65.00 mm outer diameter and a 12 mm width. Compare these with your shaft and housing before replacing. If the shaft is worn, measure it with a caliper to confirm the actual size.
- What applications is this oil seal suitable for?
- It is used on rotating shafts in gearboxes, pumps, electric motors, compressors and power transmission equipment. Its job is to retain lubricant and keep dust or water out. As a wear part, it should be checked when leaks appear.
- How do I request an equivalent size?
- Send the part number of the old seal, the shaft, housing and width dimensions, and a photo by WhatsApp. We will look for a DBH alternative or one from another brand that fits best. We can also evaluate designs with an additional lip if contamination is high.