DBH 1396 radial shaft seal — 13.7 x 24 x 5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1396 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1396 and any equivalents.
The DBH 1396 is a radial shaft seal built to keep oil or grease where it belongs and to keep dust and water out of rotating assemblies. Its small envelope suits pumps, compact motors, gearboxes and power transmission components. MR Industrial Accessories supplies this brand and helps you match the seal to your shaft and housing.
Sizing runs shaft 13.70 mm, housing 24.00 mm, height 5.00 mm. The Lx configuration means one sealing lip on a metal case, so the seal is meant for lubricated rotating shafts. The elastomer compound stands up to mineral oils and greases, and an internal spring holds the lip against the shaft to maintain the seal.
Seals in this size range turn up in small centrifugal pumps, low-power electric motors, gear reducers and compact gearboxes, plus equipment driven by belts or chains. In every case the job is the same: hold the lubricant in and keep abrasive particles out, since those particles shorten the life of bearings and gears.
Proper installation starts with the shaft. It should be polished and free of burrs, and the housing should be clean and undistorted. Coat the lip with the same oil or grease the equipment runs on, then press the seal in evenly until it seats completely. Where the shaft is already worn, a seal with an auxiliary lip is worth considering. Speed, temperature and lubricant type all factor into the choice.
Looking for a replacement for the DBH 1396? Send the part number, your shaft and housing dimensions, and a photo of the existing part. We check it against the options and confirm which one fits your equipment. We can also tell you whether the cavity has room for a taller seal or a different lip style.
For a quote on the DBH 1396, message us on WhatsApp with part number 1396 and the dimensions. We will come back with the alternatives that suit your application.
Dimensions
- Shaft (d)
- 13.7mm
- Housing bore (D)
- 24mm
- Height (h)
- 5.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 1396 seal?
- Shaft 13.70 mm, housing 24.00 mm, height 5.00 mm. These are the standard designation values, so confirm them against your equipment before ordering.
- What type of shafts is this seal used on?
- Rotating shafts in pumps, electric motors, gear reducers and transmission boxes. The single-lip Lx design retains oil or grease and blocks contaminants in low and medium speed service.
- How do I request a quote or an equivalent?
- Send part number 1396 plus your shaft and housing dimensions on WhatsApp. We will quote the DBH seal or propose an equivalent.