DBH 1392Vit radial shaft seal — 54 x 85 x 11.75/17
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1392Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1392Vit and any equivalents.
The DBH 1392Vit is a radial lip seal that keeps lubricant in and contaminants out of rotating shaft assemblies. Its dimensions are 54 mm for the shaft, 85 mm for the housing, and a stepped height of 11.75/17 mm. This makes it a suitable replacement for gearboxes, pumps and transmission equipment where axial space is tight. DBH is a brand we supply, and the 1392Vit code is available for replacement.
The 1392Vit uses an A 296-R-H design. The shaft measurement is 54 mm, the housing measurement is 85 mm, and the height is 11.75/17.00 mm. The stepped height means the seal has a flange or shoulder: the 11.75 mm section sits inside the housing, while the 17 mm section remains outside. The lip runs against the shaft, and the outer diameter stays static in the housing. This seal is a direct replacement where a machined housing with these dimensions already exists.
Typical applications include gearboxes, centrifugal pumps, mixers, speed reducers, and belt or chain transmission equipment. You will also find it in agricultural machinery, process lines and pumping systems where oil or grease must be contained and dust or water kept out. Any time a shaft turns inside a fixed housing and two environments need separation, this type of seal does the job.
During installation, verify that the shaft is within tolerance and free of burrs, and that the housing has the correct diameter and depth. Lubricate the lip before pressing it in, and use a support tube to avoid deformation. If the shaft is worn or grooved, a repair sleeve may be needed. Selection depends on speed, temperature and the fluid being sealed; with those details, the lip compound can be confirmed.
For an equivalent, send us the code 1392Vit along with the shaft and housing dimensions, a photo of the part, and the fluid type. We will review alternatives in the same radial shaft seal category. We can also point you to a variant with a different height or another lip design that fits your equipment.
If you need this oil seal for replacement, contact us on WhatsApp with the code 1392Vit and we will provide a quote.
Dimensions
- Shaft (d)
- 54mm
- Housing bore (D)
- 85mm
- Height (h)
- 11.75/17.00mm
- Design
- A 296-R-H
Frequently asked questions
- What are the dimensions of the DBH 1392Vit oil seal?
- It fits a 54 mm shaft and an 85 mm housing, with a height of 11.75/17.00 mm and an A 296-R-H design. These are the dimensions listed for this code.
- How do I request a quote for the 1392Vit?
- Send us a WhatsApp message with the code 1392Vit and the quantity you need. We will reply with the quote for the DBH line.
- Can I replace it with another oil seal if I cannot get the same code?
- Yes, an equivalent with the same shaft, housing and height dimensions can be evaluated. Send us the dimensions and the fluid type so we can verify compatibility before quoting.