DBH 1382 radial shaft seal — 130 x 150 x 12

DBH 1382 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1382 and any equivalents.

A radial shaft seal keeps lubricant where it belongs and keeps contaminants out. The DBH 1382 is a lip seal that fits a 130 mm shaft in a 150 mm housing with a 12.00 mm height, and it uses the Mx design. MR Industrial Accessories supplies this brand and will confirm the size with you before quoting.

The designation 1382 identifies this seal within the DBH line. Its three key measurements are shaft 130 mm, housing 150 mm and height 12.00 mm, and the design is Mx. In practice, Mx means a metal case with an elastomer lip and a single sealing lip, the usual arrangement for a rotating shaft that runs with oil or grease. Because the code pins down one exact part, you can order it without guessing at the size.

Typical mounting points are gearboxes, pumps, electric motors, rollers and other power transmission assemblies where a shaft turns inside a stationary housing. You will also find seals of this type on conveyors, agricultural equipment and process machinery that runs on oil or grease. In every one of those spots the job is the same: hold the lubricant in and keep dust, water and particles away from the bearings and gears behind it.

Installation is straightforward if the surrounding parts are in good shape. The shaft should be clean and free of burrs or marks, and the housing bore should be smooth with no dents. Put a film of lubricant on the lip, then seat the seal square to the shaft so it does not distort. A worn shaft is worth a second look, since a design with an extra lip may be the better choice. Speed, temperature and lubricant type all feed into the final selection and are checked against the manufacturer's data.

To get a quote, send the code 1382 together with the shaft, housing and height dimensions. The original manufacturer's code or a photo of the part works just as well. With that information the team can propose equivalents from the same brand or from other lines and come back with the quote. Questions about fit or selection are welcome at the same time.