DBH 1367Pol radial shaft seal — 45 x 70 x 14/23

DBH 1367Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1367Pol and any equivalents.

The DBH 1367Pol is a lip-type radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It mounts in a cylindrical housing and its flexible lip runs against the shaft to maintain dynamic sealing. You will find this seal in gearboxes, pumps, motors and other industrial machinery where leak control and bearing protection matter.

This seal follows the A369-R H design and is sized for a 45 mm shaft, a 70 mm housing bore and an overall height of 14.00/23.00 mm. That dual height value means the seal can include both a lip section and a cover, so it fits housings with different shoulder depths. The reinforced lip is built to handle moderate peripheral speeds and light pressure. DBH is one of the brands MR supplies, so you can source it through our team.

Typical installations include gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment. In each case the seal stops oil or grease from escaping and blocks dust, water and other particles from reaching bearings and gears. You will often see it on agricultural machinery, construction equipment and production lines where planned maintenance prevents unexpected stoppages.

When choosing a replacement, verify that the shaft and housing dimensions match the values above. The shaft should be free of burrs, with suitable surface hardness and controlled roughness so the lip is not damaged. During installation, coat the lip with the same oil or grease used in the equipment and use a tool that keeps the lip from twisting. Because the 14.00/23.00 mm height suits housings with a shoulder, check that the depth lets the lip seat evenly.

If you need an equivalent, send the code 1367Pol or the three key dimensions—shaft diameter, housing bore and height. With that information we can look for alternatives in the DBH line or other brands we carry. We can also review the A369-R H design and its variants for your specific application and operating conditions.

To request a quote for the DBH 1367Pol or ask about other sizes, message the code to MR Industrial Accessories on WhatsApp. Our technical team will respond with supply options. You can also inquire about oil seals from other series and brands we stock. We are ready to help you match the right part to your equipment.