DBH 1274Pol radial shaft seal — 29 x 46 x 13.4

DBH 1274Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1274Pol and any equivalents.

The DBH 1274Pol is a radial shaft seal that blocks oil or grease from escaping between a rotating shaft and its housing. It fits a 29 mm shaft, a 46 mm housing bore and a 13.40 mm height, and follows the A 417 design. It is pressed into place in crankcases, covers and gearboxes. MR Industrial Accessories supplies this brand and can help you verify the size before you request a quote.

This seal carries the DBH brand and the code 1274Pol. Its three key measurements are: shaft 29 mm, housing 46 mm, height 13.40 mm. The A 417 design is a single-lip seal with a metal case and a sealing lip, intended for rotating shafts. Always check these dimensions against your shaft and housing before ordering. A seal with the same cross-section but a different height will not seat or seal correctly.

Seals of this size show up in pumps, electric motors, gearboxes, reducers and transmission equipment where a shaft turns inside a lubricated housing. You will also find them in agricultural machinery, washing equipment and conveyor systems. Their job is to hold the lubricant in and keep dust, water or particles out, which helps protect the bearing or bushing from premature wear.

During installation, clean the housing and shaft, check for burrs or marks, and lubricate the lip before pressing the seal in. The lip should face the lubricant side, and you should seat the seal with a tube of the right diameter, never by hitting the lip directly. If the shaft is worn, a seal with an auxiliary lip may be an option. Speed, temperature and the fluid involved all affect the choice, so have that information ready when you ask for a quote.

To request a quote for the 1274Pol code or the 29 x 46 x 13.40 mm size, send a message via WhatsApp. At MR Industrial Accessories we compare the A 417 design with the available options and point you to a compatible one. If the original code is not in the catalog, we can also search by shaft and housing dimensions.

When you contact us, include the DBH 1274Pol code or the dimensions of the seal you are replacing. The more details you provide — equipment type, fluid, operating conditions — the more accurate our proposal will be. Write to us on WhatsApp and we will reply with the options we have for that size.