DBH 1269 radial shaft seal — 25 x 48.8 x 14

DBH 1269 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1269 and any equivalents.

When you are replacing a worn seal, the DBH 1269 radial shaft seal is a direct-fit option for a 25 mm shaft, a 48.80 mm housing bore and a 14.00 mm height. This A 410 design combines a metal outer case with a single elastomeric lip, so it keeps lubricant in and keeps dust, water and chips out of the bearing cavity. MR supplies it as part of its seals and oil seals range.

The code 1269 identifies the seal, and A 410 tells you what you are holding: a single-lip radial shaft seal with a metal case. The three dimensions that matter are shaft diameter (d) 25 mm, housing diameter (D) 48.80 mm and height (h) 14.00 mm. All three have to match the shaft and the bore, because the lip relies on the right interference to seal. This is a specific replacement part, not a generic one.

You will find seals in this size range in gearboxes, centrifugal pumps, electric motors, conveyor rollers, mixers and power transmission equipment. The job is the same everywhere: hold the oil or grease inside, and keep contaminants out. Once dust, wash water or chips reach the bearings and gears, wear speeds up. A seal that is still doing its job is one of the cheapest ways to avoid unexpected downtime.

Before fitting a DBH 1269, look at the shaft. Burrs, splines or a worn sealing band will damage the lip or leave a path for leaks. The housing should be clean and round. The lip faces the fluid you are trying to retain. Put the same oil or grease used in the equipment on the lip, then press the seal in with a tube that contacts the metal case only, never the lip. If the shaft has a deep groove, a wear sleeve or an offset-lip seal may be the better route.

If you need an equivalent, send the code 1269 along with the shaft, housing and height measurements, or a photo of the old seal and its housing. With that information we can check alternatives in the DBH line or in other brands we carry, keeping the A 410 design or whatever design your equipment calls for. We can also help if the original marking is unreadable and the size has to be worked out by measuring the parts directly.

To get a quote for the DBH 1269 oil seal, send the code to MR by WhatsApp. We will come back with the quote and any compatible options. If you follow a scheduled maintenance plan, it helps to send several seal codes in one message so the whole inquiry moves faster.