DBH 1199 radial shaft seal — 38 x 52 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1199 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1199 and any equivalents.
The DBH 1199 radial shaft seal is a lip seal that keeps lubricant in and contaminants out where a shaft rotates within a housing. It measures 38 mm shaft, 52 mm housing, and 10.00 mm height, and uses the Lx design. Common in gearboxes, pumps, electric motors, and transmission equipment, it is a wear part that MR supplies and can help you select.
This seal carries the 1199 designation. Its dimensions are shaft 38 mm, housing 52 mm, and height 10.00 mm. The Lx design indicates a single lip with a spring, intended to retain lubricant where the shaft turns in one direction. The elastomeric lip contacts the shaft, and the spring maintains pressure to compensate for wear.
You will find seals of these dimensions in gearboxes, centrifugal pumps, electric motors, compressors, and belt or chain drives. In each case, the seal prevents oil or grease from escaping and blocks dust and moisture from entering. Replace it when you see a leak, or when the lip becomes hard or cracked.
For installation, make sure the shaft is clean and free of burrs or marks, and lubricate the lip before pressing it in. Insert the seal perpendicular to the housing without hammering that could distort the case. When choosing a replacement, consider not only the 38 x 52 x 10 mm size but also the fluid type, operating temperature, and shaft speed. If the equipment runs with high vibration or misalignment, a design with more dust protection may be better.
If you need an equivalent, send the 1199 code along with the shaft, housing, and height dimensions. A photo of the old seal or the housing drawing also helps. We compare that information with available options and confirm a fit without modifying the equipment. If the Lx design is not right for your application, we review other lip and material variants.
To request a quote for the DBH 1199 oil seal or ask about an equivalent, contact us via WhatsApp or email with the code and dimensions. We will reply with the alternative that best suits your equipment.
Dimensions
- Shaft (d)
- 38mm
- Housing bore (D)
- 52mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 1199 oil seal?
- The DBH 1199 oil seal has a 38 mm shaft diameter, a 52 mm housing diameter, and a 10.00 mm height. These correspond to the 1199 designation. If your shaft or housing differs, ask us about an equivalent size.
- Where is this oil seal typically used?
- It is used in equipment with rotating shafts where lubricant must be retained and contaminants excluded, such as gearboxes, pumps, electric motors, compressors, and transmissions. It is a wear part that should be replaced when oil leaks or the lip deteriorates.
- How do I request a quote or an equivalent?
- Write to us via WhatsApp or email with the 1199 code and the dimensions you need. If you have the old seal, send a photo or the housing drawing. We will confirm the option that fits your equipment.