DBH 1196Pol radial shaft seal — 70 x 100 x 13
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1196Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1196Pol and any equivalents.
The DBH 1196Pol is a radial shaft seal built for rotating shafts. It measures 70 mm at the shaft, 100 mm at the housing, and 13 mm in height. Its job is to keep lubricant in and keep dust, water, and particles out, which helps bearings and bushings last longer. You will find it in gearboxes, pumps, and transmission equipment where a reliable seal matters.
This seal follows the A 387 Bidi design. The dimensions are shaft 70 mm, housing 100 mm, and height 13.00 mm. The lip runs against a rotating shaft, and the double-lip (bidi) layout helps hold grease or oil while blocking contaminants. The 1196Pol code identifies it within the DBH line. For tolerances or material questions, we confirm against the manufacturer's data sheet.
Use it wherever rotating motion needs sealing: gearboxes, centrifugal pumps, mixers, conveyors, and agricultural or industrial machinery. It also suits dusty or splash-prone areas, where the second lip adds protection. Treat it as a wear part and check it at every preventive maintenance stop to avoid leaks and early bearing failure.
During installation, clean the shaft and housing and remove burrs or marks that could cut the lip. Lubricate the seal before pressing it in, and apply force on the outer diameter with a tube or press, never on the lip. Speed, temperature, and the fluid being retained all affect selection. If you are unsure, send us your equipment details and we will help you choose.
To get a quote, send the 1196Pol code or the dimensions of your current seal: shaft, housing, and height. With that we can look for alternatives in the DBH line or other brands we supply. We can also advise whether the mounting space allows design or material variants for your application.
Send your quote request by WhatsApp or email. If you have a full list of seals for restocking, send it complete and we will quote it as a whole.
Dimensions
- Shaft (d)
- 70mm
- Housing bore (D)
- 100mm
- Height (h)
- 13.00mm
- Design
- A 387 Bidi
Frequently asked questions
- What are the dimensions of the DBH 1196Pol oil seal?
- It fits a 70 mm shaft, a 100 mm housing, and has a 13.00 mm height. Always compare these against the original seal before replacing, because even a small difference can cause leaks or poor installation.
- What applications is this oil seal suitable for?
- It is made for rotating shafts where lubricant must be retained and contaminants excluded. Common uses include gearboxes, pumps, mixers, and transmission equipment. The bidi design helps in dusty or splash-prone areas, but final selection depends on working speed and temperature.
- How do I request a quote or an equivalent?
- Send the 1196Pol code or your seal dimensions (shaft, housing, and height) by WhatsApp or email. We will reply with the quote and, if needed, look for an equivalent within the brands we supply.