DBH 1183Vit radial shaft seal — 70 x 85 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1183Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1183Vit and any equivalents.
The DBH 1183Vit is a radial lip seal that sits in the housing bore and rides against the shaft, holding lubricant in and keeping dust and water out. Its Lx-R H configuration pairs a sealing lip with a spring that keeps steady contact pressure on the shaft. Gearboxes, pumps, motors and other moderate-speed rotating equipment are typical homes for this seal. MR Industrial Accessories supplies it within its industrial seal range.
Reading the designation is straightforward: shaft 70 mm, housing 85 mm, height 7.00 mm. The Lx-R H code tells you the seal uses a lip with a spring, a setup meant for rotating shafts under permanent lubrication. Within the DBH line, 1183Vit identifies the lip geometry and material. As a replacement part, it drops into equipment that needs dependable sealing with low friction.
You will find this seal in gearboxes, centrifugal pumps, electric motors, conveyor rollers, and belt or chain drives. Machine tools, compressors and hydraulic systems also use it where oil must stay in and contaminants must stay out. Because it is a wear item, plan to swap it once leaks appear or bearing noise starts.
Before ordering, confirm the shaft and housing dimensions against the original seal. Lubricate the lip prior to installation and check that the shaft is free of burrs and wear. The 7.00 mm height is what sets the available space in the housing. If the equipment runs with heavy vibration or high temperature, ask about versions made from a more resistant material.
For an equivalent, give us the code 1183Vit or the shaft, housing and height dimensions. We will search the DBH line and the other brands we carry. We can also advise you when the original seal has a special design or the shaft is worn and another approach makes more sense.
To get a quote on the DBH 1183Vit seal, send the code over WhatsApp to MR Industrial Accessories. We will confirm the options with no obligation. Seals for rotating shafts are one of our lines, and we can help you choose based on how your equipment runs.
Dimensions
- Shaft (d)
- 70mm
- Housing bore (D)
- 85mm
- Height (h)
- 7.00mm
- Design
- Lx-R H
Frequently asked questions
- What are the dimensions of the DBH 1183Vit seal?
- Shaft 70 mm, housing 85 mm, height 7.00 mm. Those are the figures built into the designation. Check them against the original seal before fitting the replacement.
- What applications is this seal suitable for?
- Gearboxes, pumps, electric motors, rollers and transmission equipment. The Lx-R H lip-and-spring design seals against the shaft and stops lubricant from escaping. It suits rotating shafts at moderate speeds with permanent lubrication.
- How do I request a quote or an equivalent?
- Message MR Industrial Accessories on WhatsApp with the code 1183Vit or the shaft, housing and height dimensions. We will quote the DBH seal and look at alternatives. If the shaft is worn, we can advise on that too.