DBH 1022 radial shaft seal — 52 x 68 x 13
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1022 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1022 and any equivalents.
When a rotating shaft needs to keep lubricant in and contaminants out, a radial shaft seal like the DBH 1022 does the job. It measures 52 mm at the shaft, 68 mm at the housing bore and 13.00 mm in height, and its A 191 profile uses a single lip with a spring. MR Industrial Accessories supplies this brand and can help you confirm it fits your equipment.
The DBH 1022 is built for equipment where a shaft turns inside a fixed housing. The three dimensions you need to check are 52 mm shaft diameter (d), 68 mm housing bore (D) and 13.00 mm height (h). The A 191 designation means a single lip with a spring, which holds oil or grease on one side while keeping dust, water and particles out on the other. It is a standard replacement item in gearboxes, pumps, motors, reducers and conveyor rollers.
Before installing, inspect the shaft for burrs or deep grooves in the area where the lip will run, and make sure the housing is clean and undistorted. Apply the same oil or grease used in the assembly to the lip, then press the seal in with a flat tool that contacts the outer edge only, never the lip. How well it performs depends on shaft speed, operating temperature and the fluid being retained.
If you are looking for a replacement for code 1022, the fastest way is to send the complete code, a photo of the part and your caliper measurements. With those details we can search for equivalents in the same brand or in others we carry, always matching shaft and housing diameters. We can also tell you whether the A 191 design is the right choice for your specific equipment.
To request a quote for the DBH 1022 oil seal, send the code and the quantity you need via WhatsApp or email. Our team replies promptly and can suggest alternatives or help you choose the correct part so your equipment keeps running without leaks.
Dimensions
- Shaft (d)
- 52mm
- Housing bore (D)
- 68mm
- Height (h)
- 13.00mm
- Design
- A 191
Frequently asked questions
- What are the dimensions of the DBH 1022 oil seal?
- The DBH 1022 has a 52 mm shaft diameter, a 68 mm housing bore diameter and a 13.00 mm height. These are the A 191 dimensions you should verify with a caliper before ordering.
- How do I know if this oil seal replaces the one in my equipment?
- Check the three diameters: shaft, housing and height. If they match your original seal, it is likely to fit. Also confirm the lip type and material, especially if you run at high temperatures or with aggressive fluids.
- Can I request a size different from code 1022?
- Yes. Send the dimensions of your seal or the original code on WhatsApp or email and we will look for an alternative within the brands we supply.