V-belt Dayco EP240

DAYCO EP240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for EP240 and any equivalents.

This is a Dayco EP240 classical V-belt in an E profile, with a length of 6197.6 mm. It is a wrapped industrial belt built for heavy-duty drives where a classical cross-section is specified. Use the marking and the measured length to confirm it matches your drive before you order.

Classical V-belts in the E profile are used on large industrial drives such as heavy pumps, fans, compressors, crushers and similar equipment where the sheave grooves are cut for a classical section. Because E-section drives are large and often run at low speed with high torque, the belt is normally part of a multi-belt set. If one belt in the set has failed, check the condition of the others before replacing, since mixed wear can cause uneven loading.

To confirm fit, read the marking on the back of the old belt and compare the profile and length with this Dayco EP240. The profile is E and the length is 6197.6 mm. Also check the sheave grooves for wear, alignment and any debris, and confirm the belt sits correctly in the groove without riding on the bottom. If the old marking is unreadable, measure the outside length and the top width of the section to identify the belt.

For a quote, send the part number Dayco EP240, the quantity you need, and a photo of the belt marking or the drive nameplate if you have one. The team can confirm the profile and length and help you match the belt to the drive.