Poly-V belt Dayco E060443
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- Poly-V belts
- Series
- Poly V automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO E060443 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for E060443 and any equivalents.
The Dayco E060443 is a stretch-fit automotive multi-rib belt with 6 ribs and a 20.83 mm width. It is identified by its effective length of 1125 mm, so it seats and runs at the length the drive was designed for. Before fitting it, inspect the drive and sheaves so the new belt is not damaged by a worn pulley or misaligned accessory.
A stretch-fit belt relies on the correct rib count, width and effective length to grip the pulley grooves without a tensioner taking up slack. Check each rib for cracks, missing sections or glazing, and confirm the replacement matches the 6-rib, 20.83 mm width and 1125 mm effective length of the belt being replaced.
Look at the sheaves as closely as the belt. Grooves should be clean and free of rust, burrs or deep wear steps, and the pulleys should turn without roughness or wobble. Misalignment between accessories shortens belt life, so correct any obvious offset before the new belt is fitted.
When you request a quote, send the part number E060443, or the alias 6PKE1125, along with the rib count and effective length. If the marking on the old belt is unreadable, a photo of the belt back and the pulley layout helps confirm the right Dayco belt.
Dimensions
- Grooves
- 6
Frequently asked questions
- What size is the Dayco E060443?
- It is a 6-rib belt with a width of 20.83 mm and an effective length of 1125 mm.
- How do I identify this belt on the vehicle?
- Look for the part number E060443 or the alias 6PKE1125 on the back of the belt. If the marking is worn, count the ribs and measure the effective length.
- What should I check before installing it?
- Inspect the pulley grooves for wear, rust or burrs, check that each accessory pulley spins freely, and confirm the pulleys are aligned before fitting the new belt.