V-belt Dayco D 225
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and STARK: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO D 225 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D 225 and any equivalents.
The Dayco D 225 is a classical wrapped V-belt in the D profile, with a length of 5791.2 mm. When you are replacing a belt on an existing drive, this is the number to match against the belt you are taking off.
Start at the back of the old belt. The marking printed there gives you the profile and the length, and D 225 is what you are looking for. Confirm both against the belt data here: profile D, length 5791.2 mm. A belt that has run for a long time can measure differently than its marking once it is off the drive, so read the print rather than trusting a tape measure alone.
The same size is also listed under Stark D 225 and Gates D 225, which can help if the drive was built with a different brand or if the previous belt was replaced with something else. Send us the part number you found on the belt, along with the drive details you have, and we will confirm the D 225 or point you to the right belt for the job.
Before the new belt goes on, look over the sheaves for wear, cracks or buildup in the grooves, and check that the sheaves are aligned. On a drive with more than one belt, replace the full set together so the load stays shared evenly across the grooves.
Dimensions
- Section
- D
- Length
- 5791.2mm
Frequently asked questions
- How do I confirm the D 225 is the belt I need?
- Read the marking on the back of the belt you are replacing. Match the profile D and the length of 5791.2 mm to the Dayco D 225. If the marking is worn off, send us the drive information and we will help you confirm it.
- The belt on the drive is marked with another brand. Can you still help?
- Yes. The same size is also listed under Stark D 225 and Gates D 225. Send us the number you found and we will check it against the D 225.
- What should I send to get a quote?
- Send the part number, D 225, by WhatsApp or email. If you have the old belt in hand, include the marking from the back of it and the drive details so we can confirm the belt before quoting.