V-belt Dayco D 180
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO D 180 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D 180 and any equivalents.
The Dayco D 180 is a classical wrapped V-belt in the D profile, with a length of 4699 mm. It is built for industrial drives that use classical V-belt sections. Before you fit a new belt, take a few minutes to check the drive and the sheaves.
Inspect the sheave grooves for wear, rust, and buildup. A worn groove lets the belt sit too deep, so it slips and wears out early. Check that the sheaves are aligned and that the belt runs straight in the groove. Turn the drive over by hand and look for cracks, glazing, or missing chunks on the old belt.
The D 180 is a wrapped classical belt, so it is suited to drives where a classical section is specified. The same size is also listed under Stark as D 180. If you are replacing a belt on a drive that has been running, confirm the profile and the length marked on the back of the old belt before ordering.
Send the part number D 180 by WhatsApp or email to request a quote. If you are unsure about the profile or the length, include a photo of the marking on the old belt and the sheave dimensions. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- D
- Length
- 4699mm
Frequently asked questions
- What should I check on the drive before fitting a Dayco D 180?
- Check the sheave grooves for wear, rust, and buildup, and confirm the sheaves are aligned. A groove that is worn or contaminated will shorten belt life. Also check that the drive turns freely and that the belt sits at the correct height in the groove.
- How do I confirm the D 180 is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length. The D 180 is a D profile belt with a length of 4699 mm. If the old marking is unreadable, send a photo and the sheave dimensions for confirmation.
- Can I request a quote for the Dayco D 180 by part number?
- Yes. Send the part number D 180 by WhatsApp or email. If you need help confirming the profile or length, include the old belt marking and sheave details with your request.