V-belt Dayco CX 128
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CX 128 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CX 128 and any equivalents.
The Dayco CX 128 is a cogged classical V-belt in the CX profile, with a length of 3352.8 mm. It is built for industrial drives where a raw-edged, cogged classical belt is the correct replacement. To order, match it to the belt you are replacing.
Start by reading the marking on the back of the old belt. Look for the profile, the part number and the length, then compare them with the CX profile and 3352.8 mm length of the Dayco CX 128. If the old belt is worn or the marking is unreadable, measure the outside length and confirm the cross-section before ordering.
The CX profile and 3352.8 mm length are the two figures that identify this belt. The same size is also listed under Optibelt CX 128, so you can use that reference when checking a replacement. Send the part number, the profile and the length from your old belt, and we will confirm the match or suggest an equivalent.
Inspect the drive before fitting a new belt. Check the sheaves for wear, alignment and damage, and confirm that the belt sits correctly in the groove. Replace belts in sets where the drive uses more than one belt, so the load is shared evenly.
Dimensions
- Section
- CX
- Length
- 3352.8mm
Frequently asked questions
- How do I match the Dayco CX 128 to the belt I am replacing?
- Read the marking on the back of the old belt and compare the profile and length with the CX profile and 3352.8 mm length of the Dayco CX 128. If the marking is not clear, measure the old belt and send us the profile and length.
- What should I send to request a quote for this belt?
- Send the part number Dayco CX 128, or the profile and length from your old belt. If you have the old belt, include a photo of the back marking. We will confirm the match or suggest an equivalent.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Optibelt CX 128. You can use that reference when checking your replacement.