V-belt Dayco CX 105
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CX 105 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CX 105 and any equivalents.
The Dayco CX 105 is a cogged classical V-belt in the CX profile with a length of 2768.6 mm. Before fitting it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, rust, or embedded debris, and confirm the grooves match the CX profile. Misaligned or worn sheaves can shorten belt life and cause noise or vibration. With the drive locked out, verify that shafts turn freely and that no driven components are binding.
Measure the old belt against the Dayco CX 105 length of 2768.6 mm, and read the marking on the back of the old belt to confirm the profile and part number. The same size is also listed under Optibelt CX 105. When you request a quote, send the part number and the application details so we can help confirm the right belt.
On multi-belt drives, replace all belts in the set at the same time to keep tension even across the grooves. After installation, recheck alignment and tension, then run the drive and inspect for proper seating.
Dimensions
- Section
- CX
- Length
- 2768.6mm
Frequently asked questions
- What should I check on the drive before installing a Dayco CX 105?
- Inspect sheave grooves for wear, rust, or debris, confirm the grooves match the CX profile, and check that shafts turn freely and driven components are not binding.
- How do I confirm the Dayco CX 105 is the right belt?
- Compare the old belt length to 2768.6 mm and read the marking on the back of the old belt to confirm the CX profile and part number.
- How do I request a quote for the Dayco CX 105?
- Send the part number Dayco CX 105 by WhatsApp or email, along with your application details, and we will reply promptly.