V-belt Dayco CP90

DAYCO CP90 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP90 and any equivalents.

The Dayco CP90 is a classical V-belt with a C profile, a 2387.6 mm length, a 22 mm top width, a 14 mm height and a 40° angle. Before fitting it, inspect the drive and sheaves so the new belt runs true from the start. MR Industrial Accessories supplies this belt to maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.

A worn belt is often a symptom, not the whole problem. Check sheave grooves for wear, rust or embedded debris, and confirm the sheaves are aligned and free of wobble. A groove that has worn wide will let a new C-profile belt sit too deep, so it slips and wears out early even though the part number is correct.

Also check the drive for other causes: a seized or rough idler, a misaligned motor or pump, or a belt that has been running at the wrong tension. With the old belt off, measure the center distance and confirm the replacement matches the 2387.6 mm length called for. The Dayco CP90 is a classical wrapped V-belt in the C profile, 22 mm across the top, 14 mm high and cut at 40°.

Send the part number CP90 by WhatsApp or email and the team will confirm the belt or suggest an equivalent. If you are replacing a set, include the quantity and the drive details so the order is right the first time.