V-belt Dayco CP76
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP76 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP76 and any equivalents.
The Dayco CP76 is a classical V-belt in the C profile with a length of 2032 mm, a top width of 22 mm, a height of 14 mm and a 40-degree angle. It belongs to Dayco's line of classical wrapped industrial belts. This page covers how to match it to the belt you are replacing.
The most reliable way to confirm the CP76 is the correct belt is to read the marking on the back of the belt being replaced. Look for the part number, the profile letter and the length. If the old belt is worn or the marking is gone, measure the top width and the height at the cross-section and compare them with the 22 mm top width and 14 mm height of the C profile. Then compare the length: the CP76 is 2032 mm.
When the profile and length match, the CP76 is the belt to specify. Check the drive for sheave wear, misalignment and proper tension before installing a replacement. If the drive runs more than one belt, replace the full set so the load is shared evenly. If the marking on the old belt does not match the CP76, send us what you can read and we will help confirm the right belt or suggest an equivalent.
To request a quote, send the part number CP76 by WhatsApp or email. If you are unsure of the number, include the profile letter, the length and the width and height of the old belt, along with any photos of the marking. Our team replies promptly and can help confirm the right belt for your drive.
Dimensions
- Section
- C
- Length
- 2032mm
Frequently asked questions
- How do I match the Dayco CP76 to the belt I am replacing?
- Read the marking on the back of the old belt. If it shows the C profile and a 2032 mm length, the CP76 is the matching belt. If the marking is unreadable, measure the top width and height and compare them with the 22 mm and 14 mm of the C profile.
- What are the dimensions of the Dayco CP76?
- It is a classical V-belt in the C profile with a length of 2032 mm, a top width of 22 mm, a height of 14 mm and a 40-degree angle.
- What should I send to request a quote for the CP76?
- Send the part number CP76 by WhatsApp or email. If you are not certain of the number, include the profile letter, the length and the width and height of the old belt, plus any photos of the marking.