V-belt Dayco CP70

DAYCO CP70 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP70 and any equivalents.

The Dayco CP70 is a classical wrapped V-belt with a C profile and a length of 1879.6 mm. Its 22 mm top width, 14 mm height and 40° angle give you the dimensional data you need to match an existing drive.

When you are selecting a replacement, the profile and length are the first two details to confirm. The CP70 uses the C profile, so it fits pulleys machined for that cross-section. The 1879.6 mm length is the datum you compare against the belt you are removing. A wrapped classical belt like this one is typically used on drives where the belt runs over standard V-grooved pulleys.

To verify the CP70 against your application, check the belt marking on the back of the old belt and measure its length. If the profile and length match, the CP70 is the correct size. If you are unsure, send the part number from the old belt and the drive details to our team. We can confirm the C profile and 1879.6 mm length or suggest an equivalent.

For drives that use multiple belts, replace all belts in the set at the same time. Mixing a new belt with worn belts can cause uneven load sharing. The CP70 is supplied as a single classical wrapped V-belt. Keep the drive clean and check pulley grooves for wear during replacement.