V-belt Dayco CP158
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP158 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP158 and any equivalents.
The Dayco CP158 is a classical wrapped V-belt in the C profile, with a length of 4114.8 mm. We carry it for industrial drives where a standard classical section is specified. Before fitting it, inspect the drive and sheaves so the new belt is not damaged by worn components.
Check sheave grooves for wear, corrosion and embedded debris, and confirm the grooves match the C profile. Measure the groove width and look for a step or ridge where the belt has been running; a worn groove lets the belt sit too deep and slip. Align the sheaves and check the shafts and bearings for play before the belt goes on.
The CP158 has a 22 mm top width, 14 mm height and a 40 degree angle, with a length of 4114.8 mm. Confirm the length against the old belt and the drive layout. On multi-belt drives, fit the full set at once so the load is shared evenly.
Send us the part number CP158, or the marking from the back of the old belt, by WhatsApp or email with the quantity you need. Our team replies promptly and can help confirm the right belt for the drive or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 4114.8mm
Frequently asked questions
- What are the dimensions of the Dayco CP158?
- It is a C profile classical V-belt: 22 mm top width, 14 mm height, 40 degree angle and 4114.8 mm length.
- What should I check before installing this belt?
- Inspect the sheave grooves for wear and debris, check alignment and look for play in the shafts and bearings. Worn or misaligned sheaves can shorten belt life.
- How do I request a quote for the CP158?
- Send the part number CP158 and the quantity by WhatsApp or email. If you are unsure of the number, send the marking from the back of the old belt and we will help confirm it.