V-belt Dayco CP130
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP130 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP130 and any equivalents.
The Dayco CP130 is a classical V-belt in the C profile, with a 3403.6 mm length. The C profile is a standard classical cross-section, and the length is stated in millimeters. This page gives you the profile and length details to confirm it matches your drive.
When you look at the marking on an existing belt, the profile and length are the two numbers that decide the match. This belt has a C profile, a top width of 22 mm, a height of 14 mm and a 40-degree angle. The length is 3403.6 mm. If your drive uses a C-section classical V-belt of that length, this is the direct replacement.
The Dayco CP130 comes from the classical wrapped industrial belt series. It is not a narrow wedge belt, cogged belt, banded belt or synchronous belt, so it fits drives specified for a classical C profile. Check the pulley groove width and the belt's own marking before ordering; the length in millimeters on the back of the old belt is the fastest way to confirm the number.
For a quote, send the part number CP130, the quantity, and a photo of the old belt's marking if you have one. If the marking is worn, measure the outside length and the top width and include those with your request. We carry Dayco belts and can help you confirm the right C-profile belt for the drive.
Dimensions
- Section
- C
- Length
- 3403.6mm
Frequently asked questions
- What profile and length is the Dayco CP130?
- It is a C-profile classical V-belt with a length of 3403.6 mm. The top width is 22 mm, the height is 14 mm and the angle is 40 degrees.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows a C profile and a 3403.6 mm length, the CP130 matches. You can also measure the top width and outside length and send those with your quote request.
- What should I send to request a quote?
- Send the part number CP130, the quantity you need, and any marking or measurements from the old belt. If the old belt is not readable, a photo of the drive and pulley grooves helps us confirm the profile.