V-belt Dayco CP120
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP120 and any equivalents.
The Dayco CP120 is a classical wrapped V-belt in the C profile, with a length of 3149.6 mm. It measures 22 mm across the top, 14 mm in height and is built to a 40 degree angle. When you need to confirm a replacement, the marking on the back of the old belt is the first thing to read.
A belt that has been in service long enough to wear may have lost its legible print, so note what you can still see before it comes off the drive. The Dayco CP120 carries the part number and the C profile on the back, along with the length. If the print is gone, measure the belt and compare the profile and length against this page.
This belt is a classical wrapped V-belt, not a narrow wedge belt. The C profile is identified by the 22 mm top width and 14 mm height, and the 40 degree angle matches the groove it is designed to sit in. Confirm those three dimensions against the pulley groove before ordering.
Send the part number, the profile and the length in millimeters when you request a quote. If the old belt is unreadable, send the drive details and the measured dimensions and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3149.6mm
Frequently asked questions
- How do I read the marking on the back of a Dayco CP120?
- The back of the belt carries the Dayco part number, the C profile and the length. Clean the surface if it is dirty, and read the print before the belt is removed from the drive so you can match it to the replacement.
- What are the dimensions of the Dayco CP120?
- It is a C profile classical V-belt with a length of 3149.6 mm, a top width of 22 mm, a height of 14 mm and a 40 degree angle.
- What should I send to get a quote for this belt?
- Send the part number CP120, or if the old belt is unreadable, send the profile, the length in millimeters and the drive details. The team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.