V-belt Dayco CP104
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP104 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP104 and any equivalents.
The Dayco CP104 is a classical V-belt in the C profile with a length of 2743.2 mm. When you need to match a belt being replaced, the marking on the old belt is the fastest reference point. This page covers the dimensions to confirm before you request a quote.
Start by reading the marking on the back of the belt you are replacing. A C profile belt is identified by its profile letter and its length; the CP104 is a C profile belt with a length of 2743.2 mm. The top width is 22 mm, the height is 14 mm, and the angle is 40 degrees. Compare those figures with the old belt before ordering.
Classical wrapped V-belts like this one are used on industrial drives where the sheave groove matches the C profile. If the old belt is worn, stretched or damaged, the marking may be difficult to read. In that case, measure the outside length and the top width, and confirm the profile against the sheave groove.
We carry the Dayco CP104 for maintenance, engineering and purchasing teams. To request a quote, send the part number CP104, the quantity, and the dimensions you measured from the old belt. If the marking is unclear, our team can help confirm the right belt from the profile and length you provide.
Dimensions
- Section
- C
- Length
- 2743.2mm
Frequently asked questions
- What are the dimensions of the Dayco CP104?
- The Dayco CP104 is a C profile classical V-belt with a length of 2743.2 mm, a top width of 22 mm, a height of 14 mm and a 40 degree angle.
- How do I match the CP104 to the belt I am replacing?
- Read the marking on the back of the old belt. Confirm the profile is C, the length is 2743.2 mm, the top width is 22 mm and the height is 14 mm. If the marking is unreadable, measure the old belt and send those figures with your quote request.
- What should I send to request a quote for the CP104?
- Send the part number CP104, the quantity you need, and the dimensions from the belt being replaced. If you are unsure of the profile or length, include the old belt marking or your measurements and our team can help confirm the right belt.