V-belt Dayco CC 85
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CC
- Series
- Double angle industrial belt
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CC 85 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CC 85 and any equivalents.
The Dayco CC 85 is a double-V (hexagonal) belt with a CC profile and a length of 2260.6 mm. It is built for drives that use both sides of the belt, so the condition of the sheaves and the rest of the drive matters as much as the belt itself. Before you fit a replacement, inspect the drive so the new belt runs true and wears evenly.
Start with the sheaves. Check the grooves for wear, rust, burrs or embedded debris, and confirm they are aligned and free of wobble. A worn or misaligned groove will damage a new double-V belt quickly, regardless of the belt's profile or length.
Then check the rest of the drive: pulleys should turn freely, and any idler or tensioner should move without binding. Confirm the belt path and the required tension before installation. If the old belt shows cracking, glazing or uneven side wear, correct the cause before fitting the Dayco CC 85.
The same size is also listed under Stark CC 85, Optibelt CC 85 and Gates CC 85. Send the part number, the belt marking and a photo of the drive if you need help confirming the right belt.
Dimensions
- Section
- CC
- Length
- 2260.6mm
Frequently asked questions
- What should I check before installing the Dayco CC 85?
- Inspect the sheaves for groove wear, rust, burrs and debris, and verify alignment. Check that pulleys turn freely and that any tensioner or idler moves without binding. Correct any issues before fitting the new belt.
- How do I confirm this is the correct belt for my drive?
- Use the part number CC 85 and the belt's profile and length: CC profile, 2260.6 mm. If you are unsure, send a photo of the drive and the marking on the old belt so we can help confirm it.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark CC 85, Optibelt CC 85 and Gates CC 85.