V-belt Dayco BX173

DAYCO BX173 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX173 and any equivalents.

The Dayco BX173 is a cogged classical V-belt in the BX profile with a length of 4470.4 mm. It belongs to Dayco's line of classical raw-edged industrial belts. This page gives you what you need to match it against the belt you are replacing.

The most reliable way to match a replacement is to read the marking on the back of the old belt. Confirm the profile is BX and the length is 4470.4 mm, then compare that to the Dayco BX173. If the old belt is worn or the marking is unreadable, measure the outside length and check the cross-section before ordering.

The same size is also listed under Gates BX173, so you may find that number on a belt currently in service. Either number points to the same BX profile and 4470.4 mm length. When you request a quote, send the part number from the belt you are replacing so we can confirm it against the Dayco BX173.

Cogged classical V-belts are used on industrial drives where a raw-edged, molded-cog construction is specified. Inspect the sheaves and the rest of the drive when you replace the belt, and replace belts in sets where the drive uses matched belts. If you are unsure of the profile or length, send a photo of the belt marking with your quote request.