V-belt Dayco BX 99
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 99 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 99 and any equivalents.
The Dayco BX 99 is a cogged classical V-belt in the BX profile with a length of 2590.8 mm. It is built for industrial drives that use classical V-belt sections. To match it to the belt you are replacing, confirm the profile and the length on the old belt.
Check the marking on the back of the belt you are replacing. It should show the profile and the length. The Dayco BX 99 matches the BX profile and a length of 2590.8 mm. If the old belt is worn or the marking is gone, measure the outside length and compare it to 2590.8 mm.
The same size is also listed under Optibelt BX 99 and Gates BX 99. If you find one of those in the drive, the Dayco BX 99 is a direct size match. For a quote, send the part number BX 99 and the quantity you need.
Before you install a new belt, inspect the sheaves for wear, alignment and debris. A worn sheave can shorten belt life and cause slippage. Replace belts in sets when the drive uses more than one belt.
Dimensions
- Section
- BX
- Length
- 2590.8mm
Frequently asked questions
- How do I confirm this is the right belt?
- Look at the marking on the back of the old belt. It should read BX 99. If it does not, check the profile and the length. This belt is BX profile with a length of 2590.8 mm.
- What should I send to request a quote?
- Send the part number BX 99 and the quantity you need. If you are replacing a belt from another brand, include that part number so we can help confirm the match.
- Can I use this belt if the drive has more than one belt?
- Yes, but replace all belts in the drive at the same time. Mixing new and worn belts can cause uneven load and vibration. Inspect the sheaves before installation.