V-belt Dayco BX 90
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 90 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 90 and any equivalents.
A belt that fails early on a worn drive usually points to the sheaves, not the belt. The Dayco BX 90 is a cogged classical V-belt in the BX profile with a length of 2362.2 mm, and it is worth inspecting the drive before it goes on.
Before fitting, check the sheave grooves for wear, corrosion, and buildup. A groove that has worn wide lets the belt sit too deep, so it slips and runs hot even when tension is correct. Look at the sheaves for nicks or burrs that can cut the belt edges, and confirm the grooves are clean and true.
Check alignment between the driven and driver sheaves as well. Misalignment wears one sidewall faster than the other and shortens belt life. On a multi-belt drive, replace all belts as a set so the load stays shared evenly.
The same size is also listed under Optibelt BX 90 and Gates BX 90. Send the part number and quantity by WhatsApp or email and we will confirm the BX 90 for your drive.
Dimensions
- Section
- BX
- Length
- 2362.2mm
Frequently asked questions
- What profile and length is the Dayco BX 90?
- It is a cogged classical V-belt in the BX profile with a length of 2362.2 mm.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Optibelt BX 90 and Gates BX 90.
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, corrosion, and buildup, and check alignment between the sheaves. On a multi-belt drive, fit the belts as a set.