V-belt Dayco BX 64
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 64 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 64 and any equivalents.
If the belt on the drive is worn or the marking has rubbed off, the back of the old belt is still the fastest way to identify the replacement. This page covers the Dayco BX 64, a cogged classical V-belt in the BX profile with a length of 1701.8 mm. Read the number off the old belt and send it to us for a quote.
The back of a belt carries its identification: brand, part number and profile. On this Dayco BX 64, the marking identifies a cogged classical V-belt in the BX profile, 1701.8 mm long. If the printing is gone, measure the length and note the profile from the sheave groove, then send both so we can confirm the match.
The same size is also listed under Stark BX 64 and Optibelt BX 64, so a drive may carry any of these markings and still take the same size. When you request a quote, send the part number exactly as it appears on the belt, along with the quantity. If the marking is only partly legible, send what you can read and we will help confirm the right belt.
Dimensions
- Section
- BX
- Length
- 1701.8mm
Frequently asked questions
- Where do I find the part number on the belt?
- On the back of the belt. The marking shows the brand, part number and profile, for example Dayco BX 64. Wipe the belt clean first if it is dusty.
- The marking is worn off. What should I send?
- Send the length you measure and the profile you read from the sheave groove, plus any partial marking that remains. We will help confirm the belt.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark BX 64 and Optibelt BX 64.