V-belt Dayco BX 43
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 43 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 43 and any equivalents.
The Dayco BX 43 is a cogged classical V-belt in the BX profile with a length of 1168.4 mm. It is part of Dayco's line of classical raw-edged industrial belts. Before you fit a replacement, take a few minutes to inspect the drive and sheaves.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let a new belt sit too deep and slip, while a polished or hooked groove wall can damage the belt's raw edges. Confirm the sheaves are aligned and the shafts turn freely.
Verify the belt marking on the old belt matches the BX profile and the 1168.4 mm length. If the old belt is stretched, glazed, or has missing cogs, replace it rather than reusing it. When multiple belts run together, fit a matched set so load is shared evenly.
The same size is also listed under Optibelt BX 43. Send the part number and quantity by WhatsApp or email and our team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 1168.4mm
Frequently asked questions
- What should I check on the drive before installing a Dayco BX 43?
- Inspect sheave grooves for wear, rust, or debris, confirm alignment, and make sure shafts turn freely. Correct any issues before fitting the new belt.
- How do I confirm the BX 43 is the right size?
- Read the marking on the back of the old belt. It should show the BX profile and a length matching 1168.4 mm. If the old belt is damaged or unreadable, send us the drive details.
- Can I request a quote for the Dayco BX 43?
- Yes. Send the part number and quantity by WhatsApp or email. Our team replies promptly and can help confirm the belt or suggest an equivalent.