V-belt Dayco BP97
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP97 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP97 and any equivalents.
The Dayco BP97 is a classical wrapped V-belt in the B profile, with a length of 2540 mm. It measures 17 mm across the top, 11 mm in height, and has a 40-degree angle. This page covers what the marking on the old belt tells you and what to send when you request a quote.
When you pull a worn belt from a drive, the marking on the back is the first thing to read. Look for the part number, the profile letter, and the length. On the Dayco BP97, the marking identifies a B-profile classical wrapped V-belt at 2540 mm. Compare that to the belt you are replacing before you order, because a belt that fits the pulleys but differs in profile or length will not run correctly.
Write down the full marking from the old belt, including any numbers that follow the part number. If the back of the belt is worn or dirty, clean it and read it under good light. Take a photo of the marking and, if possible, a photo of the drive and the pulley grooves. These details let us confirm the BP97 is the right replacement or point you to the correct profile and length.
The Dayco BP97 is a classical wrapped V-belt, not a narrow wedge, cogged, or banded belt. Its B profile, 2540 mm length, 17 mm top width, 11 mm height, and 40-degree angle are the dimensions to match. Send the old belt marking, the part number, and the drive details by WhatsApp or email and we will confirm the fit or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 2540mm
Frequently asked questions
- What should I read from the old belt before requesting a quote?
- Read the full marking on the back of the belt, including the part number, profile letter, and length. For the Dayco BP97, that marking shows a B-profile classical wrapped V-belt at 2540 mm. A photo of the marking helps us confirm the match.
- Does the Dayco BP97 fit the same pulleys as any other B-profile belt?
- A B-profile belt with a 2540 mm length and the same 17 mm top width, 11 mm height, and 40-degree angle is dimensionally comparable. However, always match the full part number and marking from your old belt, because construction and application can differ even when the profile and length are the same.
- What information should I send with my quote request?
- Send the part number, the marking from the old belt, and any drive details you have, such as pulley diameters or the equipment model. If the old belt is worn, a photo of the back marking and the drive helps us confirm the Dayco BP97 or suggest an equivalent.