V-belt Dayco BP57
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP57 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP57 and any equivalents.
The Dayco BP57 is a classical wrapped V-belt in the B profile with a length of 1524 mm. This page helps you match it to the belt you are replacing by checking the marking and key dimensions.
Start by reading the marking on the back of the belt you are replacing. If it shows BP57, this is the same part number. If it shows a different number, compare the profile and length: the BP57 has a B profile, a top width of 17 mm, a height of 11 mm, and a 40-degree angle. The length is 1524 mm. These values must match the old belt for a correct fit.
If the old belt is worn or the marking is unreadable, measure the top width and the outside length. A B profile belt should measure 17 mm across the top and 11 mm in height. The 1524 mm length is the datum length for this part. Use these dimensions to confirm the replacement before ordering.
When requesting a quote, send the part number BP57 or the dimensions above. If you are unsure, send a photo of the old belt and any markings. We carry the Dayco BP57 and can help you confirm it is the right belt for your drive.
Dimensions
- Section
- B
- Length
- 1524mm
Frequently asked questions
- How do I know if the Dayco BP57 is the right replacement?
- Check the marking on your old belt. If it reads BP57, it is the same part number. If not, compare the profile and length: B profile, 17 mm top width, 11 mm height, 1524 mm length, and 40-degree angle.
- What should I send to get a quote for this belt?
- Send the part number BP57 or the dimensions from your old belt. If the marking is unreadable, send a photo of the belt and any numbers on it. We will confirm the match.
- Can I use this belt if my old belt has a different part number?
- Only if the profile and length match. The BP57 has a B profile and a 1524 mm length. If your old belt has the same profile and length, it is a valid replacement.