V-belt Dayco BP48
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP48 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP48 and any equivalents.
The Dayco BP48 is a classical wrapped V-belt in the B profile. It measures 1295.4 mm in length, with a 17 mm top width, 11 mm height and a 40° angle. This page is written for maintenance and purchasing teams matching the belt being replaced.
Start by reading the marking on the old belt. If it shows a B profile and a length close to 1295.4 mm, the Dayco BP48 is the correct size to quote. Confirm the top width and height against the worn belt before ordering, since a stretched or worn belt can measure differently from its original dimensions.
The BP48 is a classical wrapped V-belt, not a narrow wedge, cogged or banded belt. Use the profile and the 1295.4 mm length together when comparing it to the belt on the drive. A belt with the same profile but a different length will not sit correctly in the pulley grooves.
For a quote, send the part number BP48, the quantity, and the drive or equipment it fits. If the old belt marking is unreadable, send the profile, the measured length, and the pulley dimensions. Our team can confirm the B profile and the 1295.4 mm length against your application.
Dimensions
- Section
- B
- Length
- 1295.4mm
Frequently asked questions
- How do I match the Dayco BP48 to the belt I am replacing?
- Check the marking on the old belt for a B profile and a length near 1295.4 mm. Also confirm the 17 mm top width and 11 mm height against the worn belt.
- Is the BP48 a narrow wedge or cogged belt?
- No. The BP48 is a classical wrapped V-belt in the B profile with a 40° angle.
- What should I send to request a quote for the BP48?
- Send the part number BP48, the quantity required, and details of the drive or equipment. If the old belt marking is unreadable, include the profile, measured length and pulley dimensions.