V-belt Dayco BP28
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP28 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP28 and any equivalents.
When the marking on an old belt is worn or hard to read, the Dayco BP28 gives you a clear reference point. This classical V-belt has a B profile and a 787.4 mm length, with a 17 mm top width, 11 mm height and 40° angle. Use these figures to confirm the belt on the drive before you order.
The back of a used belt is often the fastest way to identify a replacement. Clean the area around the marking, note the part number and profile, then compare it with the drive. The Dayco BP28 is a classical V-belt in the B profile, so the top width and height matter as much as the length when checking fit.
If the marking is gone, measure the belt and the pulley groove instead. This belt is 787.4 mm long, 17 mm across the top, 11 mm high and has a 40° angle. Send those figures along with the part number and any photos of the drive. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 787.4mm
Frequently asked questions
- How do I read the marking on a Dayco BP28 belt?
- Look for the part number and profile on the back of the belt. The Dayco BP28 is a classical V-belt with a B profile, a 787.4 mm length, a 17 mm top width, an 11 mm height and a 40° angle. If the marking is worn, measure the belt and the pulley groove and send those figures for confirmation.
- Can you help me match this belt if the old marking is unreadable?
- Yes. Send the part number if you have it, or the measured length, top width, height and angle. For the Dayco BP28, those values are 787.4 mm, 17 mm, 11 mm and 40°. Photos of the drive and the pulley groove also help us confirm the correct belt or an equivalent.
- What information should I send with a quote request for the Dayco BP28?
- Send the part number, the quantity you need and any details from the drive, such as the pulley groove dimensions or a photo of the old belt. If you are replacing more than one belt on the same drive, let us know so we can review the set.