V-belt Dayco BP190
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP190 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP190 and any equivalents.
The Dayco BP190 is a classical V-belt in the B profile, with a length of 4902.2 mm. Its 17 mm top width, 11 mm height and 40° angle match the standard dimensions for this profile. When reading the marking on an old belt, confirm the part number and profile before ordering a replacement.
The marking on the back of a classical V-belt typically shows the part number, profile and sometimes the length. For the Dayco BP190, the profile is B and the length is 4902.2 mm. If the old belt is worn or the marking is unreadable, measure the top width and height to confirm the profile, and measure the outside length to cross-check the size.
This belt is a classical wrapped V-belt, not a narrow wedge or cogged design. It is used in industrial drives where a standard B-profile belt is specified. The 40° angle is the included angle of the belt cross-section, which must match the pulley groove angle for proper fit and wear.
When requesting a quote, send the part number BP190 and the profile B. If you have the old belt, include the marking and the measured length. Our team can confirm the belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Section
- B
- Length
- 4902.2mm
Frequently asked questions
- What does the marking on a Dayco BP190 belt tell me?
- The marking usually includes the part number BP190, the profile B, and sometimes the length. Use these details to verify the replacement matches the original.
- How do I confirm the profile if the marking is worn?
- Measure the top width and height. For the BP190, the top width is 17 mm and the height is 11 mm. These dimensions correspond to the B profile.
- What information should I send for a quote?
- Provide the part number BP190 and the profile B. If possible, include the length 4902.2 mm and a photo of the old belt marking. We will confirm the belt or suggest an equivalent.