V-belt Dayco BP175
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP175 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP175 and any equivalents.
The Dayco BP175 is a classical wrapped V-belt in the B profile. It measures 4521.2 mm in length, with a 17 mm top width, 11 mm height, and a 40° angle. This is the belt to specify when your drive calls for a B-section classical belt in that length.
Profile and length are the two dimensions that decide whether a classical V-belt fits. The B profile sets the cross-section: 17 mm across the top and 11 mm high, with a 40° angle that seats in a standard B-groove pulley. The 4521.2 mm length is the datum you match against the old belt or the drive specification.
Because this is a wrapped classical belt, the cover protects the tensile member and the belt runs in the groove as a single unit. Check the pulleys for wear, alignment, and correct groove profile before you install the replacement. If the drive uses multiple belts, replace the full set at the same time so the load stays evenly divided.
To request a quote, send the part number BP175, or give us the marking from the back of the old belt along with the profile and length. If you are unsure whether this is the correct belt, send a photo of the drive and the old belt marking, and we will help you confirm the B profile and 4521.2 mm length.
Dimensions
- Section
- B
- Length
- 4521.2mm
Frequently asked questions
- What do the profile and length of the Dayco BP175 tell me?
- The B profile means a 17 mm top width, 11 mm height, and 40° angle for a standard B-section pulley groove. The 4521.2 mm length is the belt's datum length, which you match to the drive or the old belt.
- How do I confirm the BP175 is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows a B profile and a 4521.2 mm length, the BP175 is the direct match. If the marking is worn, send us the drive details and a photo.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, install a full set of BP175 belts so each belt carries its share of the load. Mixing a new belt with worn ones can cause uneven tension and premature failure.