V-belt Dayco BP165
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP165 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP165 and any equivalents.
The Dayco BP165 is a classical wrapped V-belt with a B profile, a 4267.2 mm length, a 17 mm top width, an 11 mm height, and a 40-degree angle. We carry it for maintenance and replacement work on industrial drives. To get a quote, send the part number and the details of the drive it runs on.
When you request a quote, include the belt marking from the back of the old belt, the drive's sheave or pulley groove profile, and the number of belts in the set. If the belt is too worn to read, measure the outside length and note the profile as best you can. A photo of the drive and the old belt helps us confirm the match.
The BP165 is a B-profile classical V-belt, so it fits drives designed for that profile and length. If you are replacing more than one belt on the same drive, plan to replace the full set so the load stays even across the grooves. We can help confirm the right belt or suggest an equivalent when you send the details.
For a fast reply, message us on WhatsApp or email with the part number and the drive information. Our team reviews each request and responds with the correct belt or a suitable alternative. Include the quantity and any drive constraints so we can check the fit before you order.
Dimensions
- Section
- B
- Length
- 4267.2mm
Frequently asked questions
- What should I send to get a quote for the Dayco BP165?
- Send the part number, the belt marking from the back of the old belt, the sheave or pulley groove profile, the number of belts needed, and a photo of the drive if possible. If the marking is worn, measure the outside length and note the profile.
- Can you help confirm the right belt if I am not sure the BP165 is correct?
- Yes. Send the details of your drive and the old belt. We will check the B profile and 4267.2 mm length against your application and suggest an equivalent if needed.
- Should I replace all belts on the drive at the same time?
- Yes, when a drive uses multiple belts, replace the full set. Mixing new and worn belts can cause uneven tension and load across the grooves. Include the number of belts in your quote request.