V-belt Dayco BP134
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP134 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP134 and any equivalents.
The Dayco BP134 is a classical wrapped V-belt with a B profile and a length of 3479.8 mm. Before fitting it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, rust, or embedded debris, and confirm the grooves match the B profile. Measure the existing belt and verify the drive center distance and take-up before you install the BP134. Its 17 mm top width, 11 mm height, and 40° angle are the dimensions to compare against the old belt and the sheave grooves.
A worn or misaligned sheave will shorten the life of any classical V-belt, including this one. Spin the sheaves by hand, check for wobble or rough bearings, and correct alignment before tensioning. If the drive runs multiple belts, replace them as a set so the load stays even across all grooves.
For a quote, send the part number BP134 and the quantity you need. If you are unsure whether this B-profile belt fits your drive, include the belt marking and the sheave dimensions with your request, and we will help confirm the right belt.
Dimensions
- Section
- B
- Length
- 3479.8mm
Frequently asked questions
- What are the dimensions of the Dayco BP134?
- It is a B-profile classical wrapped V-belt with a length of 3479.8 mm, a top width of 17 mm, a height of 11 mm, and a 40° angle.
- What should I check before installing this belt?
- Inspect the sheaves for wear, rust, and debris, confirm the grooves match the B profile, and check alignment and bearing condition. On multi-belt drives, replace the belts as a set.
- How do I request a quote for the BP134?
- Send the part number BP134 and your quantity by WhatsApp or email. If you need help confirming the fit, include the belt marking and sheave dimensions with your request.