V-belt Dayco BP130
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP130 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP130 and any equivalents.
The Dayco BP130 is a classical V-belt in the B profile, with a length of 3378.2 mm, a top width of 17 mm, a height of 11 mm and a 40° angle. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly. MR Industrial Accessories LLC supplies this belt to maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
A worn belt often points to a sheave problem. Check groove wear, rust, burrs and alignment on every sheave in the drive. Worn grooves let the belt sit too deep, so it slips and overheats even when the belt itself is new. Clean the grooves and correct any misalignment before the BP130 goes on.
Match the replacement to the drive. The BP130 is a B-profile classical V-belt measuring 3378.2 mm, with a 17 mm top width, 11 mm height and 40° angle. If the drive uses more than one belt, replace the full set at the same time so the load stays shared across the grooves.
To request a quote, send the part number BP130 by WhatsApp or email. If you are matching an old belt, include the marking on the back of the belt and the drive details. The team replies promptly and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 3378.2mm
Frequently asked questions
- What are the dimensions of the Dayco BP130?
- It is a classical V-belt in the B profile with a length of 3378.2 mm, a top width of 17 mm, a height of 11 mm and a 40° angle.
- Should I inspect the sheaves before fitting the BP130?
- Yes. Check the sheave grooves for wear, rust, burrs and alignment. Worn or misaligned sheaves cause a new belt to slip and wear out early.
- How do I request a quote for the Dayco BP130?
- Send the part number BP130 by WhatsApp or email. Include the marking from your old belt and details of the drive if you need help confirming the right belt.