V-belt Dayco BP123
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP123 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP123 and any equivalents.
The Dayco BP123 is a classical V-belt in the B profile, with a length of 3200.4 mm. Classical V-belts like this are common on industrial drives where a single belt runs between two pulleys. Use the profile and length to confirm it matches the belt you are replacing.
The B profile is a classical cross-section, not a narrow wedge belt. Its top width is 17 mm, its height is 11 mm, and the included angle is 40 degrees. These dimensions matter when checking that the belt sits correctly in the pulley groove and that the replacement matches the original cross-section.
To confirm fit, read the marking on the back of the old belt and compare the profile letter and length to the BP123. If the old belt is worn or the marking is unreadable, measure the outside length and the top width, and note the pulley groove dimensions. Send those details with your quote request and we can help confirm the right belt.
This belt is part of the Dayco classical wrapped industrial belt series. The BP123 is identified by its B profile and 3200.4 mm length. When you request a quote, include the part number and any drive details you have so we can match it to your application.
Dimensions
- Section
- B
- Length
- 3200.4mm
Frequently asked questions
- How do I confirm the Dayco BP123 fits my drive?
- Check the profile and length against the belt you are replacing. The BP123 is a B profile classical V-belt with a length of 3200.4 mm. If the old belt is marked with a B profile and the same length, it is the correct cross-section and size for that pulley set.
- What should I send to request a quote for the BP123?
- Send the part number BP123, or the profile and length from the old belt. If you have the old belt, include the marking on the back and any drive details such as pulley diameters. We reply by WhatsApp or email and can help confirm the right belt.
- Where are classical V-belts like the BP123 used?
- Classical V-belts are used on industrial drives where a single belt runs between two pulleys. The B profile is a common cross-section for these drives. Confirm the profile and length before ordering to ensure the belt matches your equipment.