V-belt Dayco BP112
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP112 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP112 and any equivalents.
The Dayco BP112 is a classical V-belt in the B profile with a length of 2921 mm. This page gives the dimensions you need to match it to the belt being replaced.
To match the belt on the drive, read the marking on the back of the old belt and check the profile and length. The BP112 has a B profile, a 2921 mm length, a 17 mm top width, an 11 mm height and a 40° angle. If the marking is worn, measure the top width and the outside length and compare them with these figures.
If the belt runs in a multi-belt drive, replace all belts in the set at the same time so the load stays even. Inspect the sheaves for wear, alignment and debris before fitting the new belt. Confirm the belt sits correctly in the groove and that the drive turns freely by hand.
Send the part number BP112 by WhatsApp or email to request a quote. If you are unsure about the profile or length, include the old belt's marking and the drive details, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 2921mm
Frequently asked questions
- How do I confirm the Dayco BP112 fits my drive?
- Check the old belt's marking for a B profile and a 2921 mm length. The BP112 has a 17 mm top width, an 11 mm height and a 40° angle. If the marking is not clear, measure the old belt and compare it with these dimensions.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replace the full set so each belt carries the same load. Mixing new and worn belts can cause uneven tension and premature failure.
- What information do you need to quote the BP112?
- Send the part number BP112 and the quantity you need by WhatsApp or email. If you want us to confirm the profile or length, include the marking from the old belt or the measured dimensions.