V-belt Dayco BP106
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP106 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP106 and any equivalents.
The Dayco BP106 is a classical V-belt in the B profile, with a length of 2768.6 mm. It measures 17 mm across the top, 11 mm high, and has a 40-degree angle. If you are replacing a belt on an existing drive, match these figures to the belt you are removing.
The most reliable way to identify the correct replacement is to read the marking on the back of the old belt. Compare the profile letter and the length to the BP106: B profile, 2768.6 mm. Then check the top width, height, and angle against the worn belt or the drive sheave grooves. A belt that matches on all of these points will seat correctly and run as intended.
If the old belt is worn, stretched, or the marking is no longer legible, measure what you can. A B profile belt is 17 mm across the top and 11 mm high, so the sheave groove width gives you a quick cross-check. The 40-degree angle is the standard for this profile. When the belt is part of a multi-belt drive, replace all belts in the set at the same time so the load stays evenly distributed.
We carry the Dayco BP106 for maintenance, engineering, and purchasing teams. To request a quote, send the part number by WhatsApp or email. If you are unsure whether this is the right belt, include the old belt's marking or your measurements and our team will help confirm it.
Dimensions
- Section
- B
- Length
- 2768.6mm
Frequently asked questions
- How do I confirm the Dayco BP106 matches the belt I am replacing?
- Check the marking on the back of the old belt for the profile and length, then compare it to the BP106: B profile, 2768.6 mm. Also verify the top width (17 mm), height (11 mm), and angle (40 degrees) against the old belt or the sheave grooves.
- What should I send to get a quote for the BP106?
- Send the part number BP106 by WhatsApp or email. If you want us to help confirm the fit, include a photo of the old belt's marking or your measurements of the profile, length, top width, and height.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, replacing the full set at the same time helps keep tension and load even across the belts. A single new belt mixed with worn belts can carry more than its share of the load.