V-belt Dayco BP102
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP102 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP102 and any equivalents.
The Dayco BP102 is a classical wrapped V-belt in a B profile. It measures 2667 mm in length, with a 17 mm top width, 11 mm height and a 40-degree angle. Use these dimensions to match it against the belt you are replacing.
The most reliable way to identify a replacement is to read the marking on the back of the old belt and compare it with the profile and length above. If the marking is worn or missing, measure the top width and the outside length, then check the angle. A B profile belt should measure 17 mm across the top and 11 mm in height, with a 40-degree angle.
Before ordering, inspect the drive for worn sheaves, misalignment or damaged guards, since these can shorten belt life. When a drive uses more than one belt, replace the full set at the same time so the load stays evenly distributed. Confirm the belt sits correctly in the sheave groove and that the tension is set to the drive manufacturer's specification.
We carry the Dayco BP102 for maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. To request a quote, send the part number BP102 by WhatsApp or email. If you are unsure whether this is the right belt, send the old belt's marking or your measurements and our team will help confirm the correct belt.
Dimensions
- Section
- B
- Length
- 2667mm
Frequently asked questions
- How do I confirm the Dayco BP102 matches the belt I am replacing?
- Check the profile and length: B profile, 2667 mm length, 17 mm top width, 11 mm height and a 40-degree angle. Compare these with the marking on the old belt or with your own measurements.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replacing the full set at the same time helps keep the load evenly distributed between the belts.
- What should I send to get a quote for the BP102?
- Send the part number BP102 by WhatsApp or email. If you want us to confirm the belt first, include the marking from the old belt or your measured profile and length.