V-belt Dayco BB 118
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BB
- Series
- Double angle industrial belt
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BB 118 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BB 118 and any equivalents.
The Dayco BB 118 is a double-V (hexagonal) belt in the BB profile with a length of 3073.4 mm. It is part of Dayco's double angle industrial belt series. When you need a replacement, start by reading the marking on the back of the old belt.
The marking on a double-V belt typically shows the profile and a length code. On this Dayco belt, the marking is BB 118. The profile is BB and the length is 3073.4 mm. Use both when comparing against the belt you are replacing. If the old belt is worn or dirty, clean the back so the characters are legible before you write them down.
A double-V belt drives from both sides, so it is used where power must be transmitted to two sets of pulleys. The BB profile and 3073.4 mm length are the key dimensions. The same size is also listed under Mitsuboshi BB 118, Optibelt BB 118 and Gates BB 118. If your drive uses more than one belt, replace the full set at the same time so the load stays even across the belts.
To request a quote, send the marking from your old belt: BB 118. Include the quantity and any other details from the drive. If the marking is unreadable, measure the length and note the profile from the pulley groove. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BB
- Length
- 3073.4mm
Frequently asked questions
- How do I read the marking on a Dayco BB 118 belt?
- The marking is on the back of the belt and shows BB 118. BB is the profile and 118 is the length code. The length in millimeters is 3073.4 mm.
- What does the BB profile mean on a double-V belt?
- BB is the profile designation for this double-V (hexagonal) belt. It indicates the cross-section shape and size. The belt length is 3073.4 mm.
- What should I send to get a quote for this belt?
- Send the marking from your old belt, BB 118, along with the quantity you need. If the marking is not clear, note the profile and length from the drive. Our team will confirm the belt or suggest an equivalent.