V-belt Dayco AX89
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AX89 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX89 and any equivalents.
The Dayco AX89 is a cogged classical V-belt in the AX profile with a length of 2311.4 mm. When you are replacing a belt, the most reliable starting point is the marking on the belt itself. This page explains how to match that marking to the AX89 and what to send when you request a quote.
Read the back of the old belt before you remove it. Look for the profile and the part number: an AX profile belt marked AX89 is the direct match. The same size is also listed under Gates AX89, so if that is what you find on the belt, the Dayco AX89 is the equivalent size in our line.
Check the drive while the belt is off. Inspect the sheaves for wear, alignment and any damage that could shorten belt life. On a multi-belt drive, replace all belts in the set at the same time so the load stays evenly divided. Confirm that the replacement belt sits correctly in the groove and that the tension is set to the drive manufacturer's specification.
To request a quote, send the part number AX89, the quantity, and the application details. If the old belt is unmarked or the number is worn away, send the profile and the length you measure, along with photos of the belt and the drive. We carry Dayco belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 2311.4mm
Frequently asked questions
- How do I confirm the Dayco AX89 is the right replacement?
- Match the marking on the old belt. If it reads AX89, this is the same profile and length. If the marking is unreadable, measure the outside length and compare it to 2311.4 mm, and check that the belt is an AX profile.
- What should I send with my quote request?
- Send the part number AX89, the quantity you need, and a brief description of the drive. If you are replacing an unmarked belt, include the profile, the measured length, and photos of the belt and sheaves.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, yes. Replacing the full set at the same time keeps the load shared evenly and avoids mismatched tension between old and new belts.