V-belt Dayco AX 88
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AX 88 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 88 and any equivalents.
The Dayco AX 88 is a cogged classical V-belt in the AX profile with a length of 2286 mm. It is built for industrial drives where a raw-edged, cogged classical belt is specified. This page covers how to match it to the belt you are replacing.
Start by reading the marking on the back of the old belt. If it shows AX 88, this is the same part. If the marking is worn, measure the outside length and compare it to 2286 mm, and confirm the profile is AX. The same size is also listed under Optibelt AX 88 and Gates AX 88, so you can cross-check those markings if the belt on the drive carries a different brand name.
Check the drive before ordering. Look for worn sheave grooves, misalignment, or a belt that has flipped or frayed, since these can shorten belt life. If the drive runs multiple belts, replace the full set at the same time so the load stays even across all strands. For a quote, send the part number AX 88 and the quantity you need.
We carry the Dayco AX 88 and can confirm it against your application. If you are unsure whether the old belt is an AX profile or a different cross-section, send a photo of the marking and the sheave width. The team replies by WhatsApp or email with the right belt or an equivalent.
Dimensions
- Section
- AX
- Length
- 2286mm
Frequently asked questions
- How do I confirm the Dayco AX 88 is the correct replacement?
- Read the marking on the back of the belt you are replacing. If it reads AX 88, it matches. If the marking is not legible, measure the outside length and compare it to 2286 mm, and confirm the cross-section is AX.
- Can I replace just one belt on a multi-belt drive?
- For even load sharing, replace all belts on the drive as a set. Mixing a new belt with worn belts can cause the new one to carry more load and wear faster.
- What information do I need to request a quote?
- Send the part number AX 88 and the quantity required. If you are unsure of the profile, include a photo of the old belt marking and the sheave width so we can confirm the match.