V-belt Dayco AX 62
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AX 62 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 62 and any equivalents.
The Dayco AX 62 is a cogged classical V-belt in the AX profile, with a length of 1625.6 mm. It is part of Dayco's line of classical raw-edged industrial belts. This page gives you the details needed to match it to the belt you are replacing.
Start by reading the marking on the back of the old belt. You are looking for the profile and the part number: AX and 62. The AX profile is a classical V-belt cross-section, and the 62 indicates the length in the part numbering system. The Dayco AX 62 has a length of 1625.6 mm. If the old belt is worn or the marking is unreadable, measure the length and confirm the cross-section before ordering.
The same size is also listed under Mitsuboshi AX 62 and Optibelt AX 62. If you prefer one of those brands, we can quote that as well. The cogged construction is typical of raw-edged classical belts, which are used on industrial drives where a standard classical V-belt is specified. This belt is not a narrow wedge belt, a banded belt, or a synchronous belt.
To request a quote, send the part number AX 62, the brand Dayco, and the quantity you need. If you are replacing belts on a multi-belt drive, it is good practice to replace all belts in the set at the same time. Our team can help confirm the right belt or suggest an equivalent based on the information you provide.
Dimensions
- Section
- AX
- Length
- 1625.6mm
Frequently asked questions
- How do I confirm the Dayco AX 62 is the right belt for my drive?
- Check the marking on the old belt. It should show the profile AX and the part number 62. The Dayco AX 62 has a length of 1625.6 mm. If the old belt is too worn to read, measure the outside length and the cross-section, then send those details with your request.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Mitsuboshi AX 62 and Optobelt AX 62. We can quote any of these brands.
- What information should I send to request a quote?
- Send the part number AX 62, the brand Dayco, and the quantity. If you are replacing a set, include the number of belts on the drive. If you are unsure about the profile or length, send a photo of the old belt marking and we can help confirm.