V-belt Dayco AX 54
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AX 54 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 54 and any equivalents.
The Dayco AX 54 is a cogged classical V-belt with an AX profile and a length of 1422.4 mm. It is built for industrial drives that use classical V-belt dimensions. To match it to the belt being replaced, read the marking on the back of the old belt and compare the profile and length.
The marking on the back of the old belt is the starting point. Look for the profile, AX, and the length, 1422.4 mm. The Dayco AX 54 uses the same profile and length, so it is the direct match when the old belt carries that marking. If the old belt is worn or the marking is unreadable, measure the outside length and confirm the cross-section before ordering.
The same size is also listed under Mitsuboshi AX 54 and Optibelt AX 54. This gives you options when you need to match a drive that already uses one of those brands. The profile and length remain the same across these listings, so the fit on the drive is unchanged.
When you request a quote, send the part number, AX 54, along with the profile and length from the old belt. If you are replacing more than one belt on the same drive, include the quantity and the drive position. We carry the Dayco AX 54 and can help confirm it matches your application.
Dimensions
- Section
- AX
- Length
- 1422.4mm
Frequently asked questions
- How do I confirm the Dayco AX 54 matches the belt I am replacing?
- Read the marking on the back of the old belt. If it shows the AX profile and a length of 1422.4 mm, the Dayco AX 54 is the match. If the marking is worn, measure the outside length and check the cross-section.
- What information should I send with my quote request?
- Send the part number, AX 54, and the profile and length from the old belt. If you are replacing multiple belts on the same drive, include the quantity and the drive position.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Mitsuboshi AX 54 and Optibelt AX 54.