V-belt Dayco AX 42
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AX 42 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 42 and any equivalents.
The Dayco AX 42 is a cogged classical V-belt in the AX profile with a length of 1117.6 mm. Cogged classical belts are commonly used on industrial drives where a standard classical profile is required and the cogged construction helps with flexibility around smaller pulleys. This page covers how to confirm fit and what to send when requesting a quote.
To confirm the AX 42 fits your drive, check the existing belt marking for the profile and length. The AX profile and 1117.6 mm length must match the drive's pulley groove and center distance. If the old belt is worn or unreadable, measure the outside length and compare it to 1117.6 mm, and verify the cross-section matches the AX profile.
The same size is also listed under Stark AX 42 and Optibelt AX 42. We carry the Dayco AX 42. When replacing, inspect all pulleys for wear, alignment and groove condition, and replace belts in sets where multiple belts run together to keep load sharing even.
For a quote, send the part number AX 42, the quantity, and the drive details or a photo of the old belt marking. If you need help confirming the right belt or an equivalent, our team can assist by WhatsApp or email.
Dimensions
- Section
- AX
- Length
- 1117.6mm
Frequently asked questions
- How do I confirm the Dayco AX 42 fits my drive?
- Match the AX profile and 1117.6 mm length to your existing belt marking or measured length. Also check that the pulley grooves are compatible with the AX cross-section.
- What should I send to request a quote for the AX 42?
- Send the part number AX 42, the quantity needed, and any drive details or a photo of the old belt marking. We reply by WhatsApp or email.
- Is the same size listed under other brands?
- Yes, the same size is also listed under Stark AX 42 and Optibelt AX 42.